Release Notes for Version 2.0.1.1

Note that the 2.0.1.1 update is applicable to the
FXS-1401, IP-1302 and IP-2302 only.

This update is NOT APPLICABLE to the
FXS-1301, FXO-1301, IP-1301 and IP-2301.

See also 2.0.1.1 update instructions.

Changes in 2.0.1.1 - Build date: 15 June 2004

Added Features

1. Added ability to reset to factory defaults by phone handset.

Press the following four keys: # 3 1 * in sequence to reset all parameters (including IP address) to default.

2. PSTN mode is active.

Press the following two keys: # 9 and the gateway will connect you to the PSTN line. When you hang up it will return to normal operation.

If the PSTN line receives a call it will ring line 1 if available if not then it will ring line 2. This is accessed on the Advanced page as a check box. It can also be set through telnet using:

set h323 pstn_enable <on|off>

Warning: Do not delete the #31 or #9 entries from the dial plan! Doing so will remove the functionality described above.

3. Increased number of Receive MAC security MAC address slots to 20 (only available through telnet). Syntax for this is:

Set h323 <number 0-19> <MAC address>

Bug Fixes

1. (FXS-1401 only) All front-panel indicators, including PSTN, TEL1 and TEL2, are now fully functional.